Integration

Synopsis

Learn how to integrate IBC to your application This document outlines the required steps to integrate and configure the IBC module to your Cosmos SDK application and enable sending fungible token transfers to other chains. An example app using ibc-go v10 is linked.

Integrating the IBC module

Integrating the IBC module to your SDK-based application is straightforward. The general changes can be summarized in the following steps:

Define additional Keeper fields for the new modules on the App type.
Add the module’s StoreKeys and initialize their Keepers.
Create Application Stacks with Middleware
Set up IBC router and add route for the transfer module.
Grant permissions to transfer’s ModuleAccount.
Add the modules to the module Manager.
Update the module SimulationManager to enable simulations.
Integrate light client modules (e.g. 07-tendermint).
Add modules to Begin/EndBlockers and InitGenesis.

Add application fields to `App`

We need to register the core ibc and transfer Keepers. To support the use of IBC v2, transferv2 and callbacksv2 must also be registered as follows:

app.go

import (

  / other imports
  / ...
  ibckeeper "github.com/cosmos/ibc-go/v10/modules/core/keeper"
  ibctransferkeeper "github.com/cosmos/ibc-go/v10/modules/apps/transfer/keeper"
  / ibc v2 imports
  transferv2 "github.com/cosmos/ibc-go/v10/modules/apps/transfer/v2"
  ibccallbacksv2 "github.com/cosmos/ibc-go/v10/modules/apps/callbacks/v2"
)

type App struct {
  / baseapp, keys and subspaces definitions

  / other keepers
  / ...
  IBCKeeper        *ibckeeper.Keeper / IBC Keeper must be a pointer in the app, so we can SetRouter on it correctly
  TransferKeeper   ibctransferkeeper.Keeper / for cross-chain fungible token transfers

  / ...
  / module and simulation manager definitions
}

Configure the `Keeper`s

Initialize the IBC Keepers (for core ibc and transfer modules), and any additional modules you want to include.

Notice The capability module has been removed in ibc-go v10, therefore the ScopedKeeper has also been removed

import (

  / other imports
  / ...
  authtypes "github.com/cosmos/cosmos-sdk/x/auth/types"

  ibcexported "github.com/cosmos/ibc-go/v10/modules/core/exported"
  ibckeeper "github.com/cosmos/ibc-go/v10/modules/core/keeper"
    "github.com/cosmos/ibc-go/v10/modules/apps/transfer"
  ibctransfertypes "github.com/cosmos/ibc-go/v10/modules/apps/transfer/types"
  ibctm "github.com/cosmos/ibc-go/v10/modules/light-clients/07-tendermint"
)

func NewApp(...args) *App {
  / define codecs and baseapp

  / ... other module keepers

  / Create IBC Keeper
  app.IBCKeeper = ibckeeper.NewKeeper(
		appCodec,
		runtime.NewKVStoreService(keys[ibcexported.StoreKey]),
		app.GetSubspace(ibcexported.ModuleName),
		app.UpgradeKeeper,
		authtypes.NewModuleAddress(govtypes.ModuleName).String(),
	)

  / Create Transfer Keeper
  app.TransferKeeper = ibctransferkeeper.NewKeeper(
		appCodec,
		runtime.NewKVStoreService(keys[ibctransfertypes.StoreKey]),
		app.GetSubspace(ibctransfertypes.ModuleName),
		app.IBCKeeper.ChannelKeeper,
		app.IBCKeeper.ChannelKeeper,
		app.MsgServiceRouter(),
		app.AccountKeeper,
		app.BankKeeper,
		authtypes.NewModuleAddress(govtypes.ModuleName).String(),
	)

  / ... continues
}

Create Application Stacks with Middleware

Middleware stacks in IBC allow you to wrap an IBCModule with additional logic for packets and acknowledgements. This is a chain of handlers that execute in order. The transfer stack below shows how to wire up transfer to use packet forward middleware, and the callbacks middleware. Note that the order is important.

/ Create Transfer Stack for IBC Classic
    maxCallbackGas := uint64(10_000_000)
    wasmStackIBCHandler := wasm.NewIBCHandler(app.WasmKeeper, app.IBCKeeper.ChannelKeeper, app.IBCKeeper.ChannelKeeper)

var transferStack porttypes.IBCModule
transferStack = transfer.NewIBCModule(app.TransferKeeper)
/ callbacks wraps the transfer stack as its base app, and uses PacketForwardKeeper as the ICS4Wrapper
/ i.e. packet-forward-middleware is higher on the stack and sits between callbacks and the ibc channel keeper
/ Since this is the lowest level middleware of the transfer stack, it should be the first entrypoint for transfer keeper's
/ WriteAcknowledgement.
    cbStack := ibccallbacks.NewIBCMiddleware(transferStack, app.PacketForwardKeeper, wasmStackIBCHandler, maxCallbackGas)

transferStack = packetforward.NewIBCMiddleware(
  cbStack,
  app.PacketForwardKeeper,
  0, / retries on timeout
  packetforwardkeeper.DefaultForwardTransferPacketTimeoutTimestamp,
)

IBC v2 Application Stack

For IBC v2, an example transfer stack is shown below. In this case the transfer stack is using the callbacks middleware.

/ Create IBC v2 transfer middleware stack
/ the callbacks gas limit is recommended to be 10M for use with wasm contracts
    maxCallbackGas := uint64(10_000_000)
    wasmStackIBCHandler := wasm.NewIBCHandler(app.WasmKeeper, app.IBCKeeper.ChannelKeeper, app.IBCKeeper.ChannelKeeper)

var ibcv2TransferStack ibcapi.IBCModule
	ibcv2TransferStack = transferv2.NewIBCModule(app.TransferKeeper)

ibcv2TransferStack = ibccallbacksv2.NewIBCMiddleware(transferv2.NewIBCModule(app.TransferKeeper), app.IBCKeeper.ChannelKeeperV2, wasmStackIBCHandler, app.IBCKeeper.ChannelKeeperV2, maxCallbackGas)

Register module routes in the IBC `Router`

IBC needs to know which module is bound to which port so that it can route packets to the appropriate module and call the appropriate callbacks. The port to module name mapping is handled by IBC’s port Keeper. However, the mapping from module name to the relevant callbacks is accomplished by the port Router on the ibc module. Adding the module routes allows the IBC handler to call the appropriate callback when processing a channel handshake or a packet. Currently, a Router is static so it must be initialized and set correctly on app initialization. Once the Router has been set, no new routes can be added.

app.go

import (

  / other imports
  / ...
  porttypes "github.com/cosmos/ibc-go/v10/modules/core/05-port/types"
  ibctransfertypes "github.com/cosmos/ibc-go/v10/modules/apps/transfer/types"
)

func NewApp(...args) *App {
  / .. continuation from above

  / Create static IBC router, add transfer module route, then set and seal it
    ibcRouter := porttypes.NewRouter()

ibcRouter.AddRoute(ibctransfertypes.ModuleName, transferStack)
  / Setting Router will finalize all routes by sealing router
  / No more routes can be added
  app.IBCKeeper.SetRouter(ibcRouter)

  / ... continues

IBC v2 Router

With IBC v2, there is a new router that needs to register the routes for a portID to a given IBCModule.

/ IBC v2 router creation
	ibcRouterV2 := ibcapi.NewRouter()

ibcRouterV2.AddRoute(ibctransfertypes.PortID, ibcv2TransferStack)
  / Setting Router will finalize all routes by sealing router
  / No more routes can be added
	app.IBCKeeper.SetRouterV2(ibcRouterV2)

Module `Manager` and `SimulationManager`

In order to use IBC, we need to add the new modules to the module Manager and to the SimulationManager, in case your application supports simulations.

app.go

import (

  / other imports
  / ...
  "github.com/cosmos/cosmos-sdk/types/module"

  ibc "github.com/cosmos/ibc-go/v10/modules/core"
    "github.com/cosmos/ibc-go/v10/modules/apps/transfer"
)

func NewApp(...args) *App {
  / ... continuation from above

  app.ModuleManager = module.NewManager(
    / other modules
    / ...
    / highlight-start
+   ibc.NewAppModule(app.IBCKeeper),
+   transfer.NewAppModule(app.TransferKeeper),
    / highlight-end
  )

  / ...

  app.simulationManager = module.NewSimulationManagerFromAppModules(
    / other modules
    / ...
    app.ModuleManager.Modules,
    map[string]module.AppModuleSimulation{
},
  )

  / ... continues

Module account permissions

After that, we need to grant Minter and Burner permissions to the transfer ModuleAccount to mint and burn relayed tokens.

app.go

import (

  / other imports
  / ...
  "github.com/cosmos/cosmos-sdk/types/module"
  authtypes "github.com/cosmos/cosmos-sdk/x/auth/types"

  / highlight-next-line
+ ibctransfertypes "github.com/cosmos/ibc-go/v10/modules/apps/transfer/types"
)

/ app.go
var (
  / module account permissions
  maccPerms = map[string][]string{
    / other module accounts permissions
    / ...
    ibctransfertypes.ModuleName: {
    authtypes.Minter, authtypes.Burner
},
}
)

Integrating light clients

Note that from v10 onwards, all light clients are expected to implement the LightClientInterface interface defined by core IBC, and have to be explicitly registered in a chain’s app.go. This is in contrast to earlier versions of ibc-go when 07-tendermint and 06-solomachine were added out of the box. Follow the steps below to integrate the 07-tendermint light client.

All light clients must be registered with module.Manager in a chain’s app.go file. The following code example shows how to instantiate 07-tendermint light client module and register its ibctm.AppModule.

app.go

import (

  / other imports
  / ...
  "github.com/cosmos/cosmos-sdk/types/module"
  / highlight-next-line
+ ibctm "github.com/cosmos/ibc-go/v10/modules/light-clients/07-tendermint"
)

/ app.go
/ after sealing the IBC router
    clientKeeper := app.IBCKeeper.ClientKeeper
    storeProvider := app.IBCKeeper.ClientKeeper.GetStoreProvider()
    tmLightClientModule := ibctm.NewLightClientModule(appCodec, storeProvider)

clientKeeper.AddRoute(ibctm.ModuleName, &tmLightClientModule)
/ ...
app.ModuleManager = module.NewManager(
  / ...
  ibc.NewAppModule(app.IBCKeeper),
  transfer.NewAppModule(app.TransferKeeper), / i.e ibc-transfer module

  / register light clients on IBC
  / highlight-next-line
+ ibctm.NewAppModule(tmLightClientModule),
)

Allowed Clients Params

The allowed clients parameter defines an allow list of client types supported by the chain. The default value is a single-element list containing the AllowedClients wildcard ("*"). Alternatively, the parameter may be set with a list of client types (e.g. "06-solomachine","07-tendermint","09-localhost"). A client type that is not registered on this list will fail upon creation or on genesis validation. Note that, since the client type is an arbitrary string, chains must not register two light clients which return the same value for the ClientType() function, otherwise the allow list check can be bypassed.

Application ABCI ordering

One addition from IBC is the concept of HistoricalInfo which is stored in the Cosmos SDK x/staking module. The number of records stored by x/staking is controlled by the HistoricalEntries parameter which stores HistoricalInfo on a per-height basis. Each entry contains the historical information for the Header and ValidatorSet of this chain which is stored at each height during the BeginBlock call. The HistoricalInfo is required to introspect a blockchain’s prior state at a given height in order to verify the light client ConsensusState during the connection handshake.

app.go

import (

  / other imports
  / ...
  stakingtypes "github.com/cosmos/cosmos-sdk/x/staking/types"
  ibcexported "github.com/cosmos/ibc-go/v10/modules/core/exported"
  ibckeeper "github.com/cosmos/ibc-go/v10/modules/core/keeper"
  ibctransfertypes "github.com/cosmos/ibc-go/v10/modules/apps/transfer/types"
)

func NewApp(...args) *App {
  / ... continuation from above

  / add x/staking, ibc and transfer modules to BeginBlockers
  app.ModuleManager.SetOrderBeginBlockers(
    / other modules ...
    stakingtypes.ModuleName,
    ibcexported.ModuleName,
    ibctransfertypes.ModuleName,
  )

app.ModuleManager.SetOrderEndBlockers(
    / other modules ...
    stakingtypes.ModuleName,
    ibcexported.ModuleName,
    ibctransfertypes.ModuleName,
  )

  / ...
    genesisModuleOrder := []string{
    / other modules
    / ...
    ibcexported.ModuleName,
    ibctransfertypes.ModuleName,
}

app.ModuleManager.SetOrderInitGenesis(genesisModuleOrder...)

  / ... continues

That’s it! You have now wired up the IBC module and the transfer module, and are now able to send fungible tokens across different chains. If you want to have a broader view of the changes take a look into the SDK’s SimApp.

IBC Protocol

IBC Core

IBC Migrations

IBC Light Clients

IBC Apps

IBC Middleware

Synopsis

Integrating the IBC module

Add application fields to `App`

Configure the `Keeper`s

Create Application Stacks with Middleware

IBC v2 Application Stack

Register module routes in the IBC `Router`

IBC v2 Router

Module `Manager` and `SimulationManager`

Module account permissions

Integrating light clients

Allowed Clients Params

Application ABCI ordering

​Synopsis

​Integrating the IBC module

​Add application fields to App

​Configure the Keepers

​Create Application Stacks with Middleware

​IBC v2 Application Stack

​Register module routes in the IBC Router

​IBC v2 Router

​Module Manager and SimulationManager

​Module account permissions

​Integrating light clients

​Allowed Clients Params

​Application ABCI ordering

Synopsis

Integrating the IBC module

Add application fields to `App`

Configure the `Keeper`s

Create Application Stacks with Middleware

IBC v2 Application Stack

Register module routes in the IBC `Router`

IBC v2 Router

Module `Manager` and `SimulationManager`

Module account permissions

Integrating light clients

Allowed Clients Params

Application ABCI ordering